Chimney Repair in Wichita Falls - Camera Evidence Before Any Quote

Trusted Chimney Repair for Wichita Falls Homeowners

A cracked flue tile, a rusted chase cover, or masonry that has quietly gone soft over a wet spring doesn’t announce itself. It waits for the first cold snap, when you light the first fire of the season and hope everything above the damper still holds. That’s the moment we built this service around. Our technicians have up to 15 years of experience diagnosing what’s actually wrong inside a flue, and we repair what we find on the same visit instead of handing you a list and a subcontractor’s phone number. A blocked or cracked flue doesn’t warn you before it becomes dangerous, which is why we pair every sweep with a camera look and a written record of what we saw.

Call (855) 705-9859

We work with homeowners across Wichita Falls who heat with fireplaces, wood stoves, and gas inserts, plus the ones who just moved in and want to know what they bought. Repair work uses professional-tier materials: DuraFlex stainless flexible liners, HeatShield ceramic resurfacing for deteriorated tile, and components from Olympia Chimney and Copperfield. Same-day repair is often possible when the diagnosis lines up with the parts and time. Call (855) 705-9859 and we’ll get you on the schedule. We answer 24/7. Fast dispatch from 7am to 7pm.

Chimney Cap Installation

Chimney Cap Installation covers the single cheapest piece of protection your chimney has: a fitted cap over the flue opening that keeps rain, birds, and squirrels out while letting smoke and carbon monoxide escape. If your flue is open to the sky right now, you need one. It matters more here than in most places, because North Texas swings from dry, dusty weeks to soaking spring storms, and water that gets into an uncapped flue works on mortar and tile joints for years before you notice. We install stainless and powder-coated caps sized to the actual flue, not a universal fit that rattles loose in wind. Typical installation runs in the low hundreds of dollars, with the written estimate setting the final price.

Single-Flue and Multi-Flue Caps

A single-flue cap fits one opening and is the common choice on most Wichita Falls homes with a masonry fireplace. Multi-flue caps span the whole crown and protect every flue in a shared stack, which is what you want if you have a furnace flue and a fireplace flue side by side. We measure the crown and the flue spacing before ordering, so the cap sits level and seals at the edges.

Animal Guards and Spark Screens

Bird nests and squirrel debris are a real cause of blocked flues in this part of Texas, and a cap with a proper mesh screen stops them from getting in at all. The mesh also catches embers and keeps sparks off a shingle roof. If you already have a cap with torn or rusted mesh, we can often fit a new screen without replacing the whole unit.

Chimney Cap Replacement

Chimney Cap Replacement is the fix when a cap has rusted through, been dented by a falling branch, or lost its mesh and started letting wildlife in. Caps don’t last forever, and a failed one is worse than none because it can funnel water toward the flue instead of shedding it. Look for rust stains running down the exterior, a cap that moves when you nudge it, or mesh that’s torn away. We remove the old cap, inspect the flue and crown underneath while we have access, and fit a replacement sized to the same opening. Most replacements land in the low to mid hundreds of dollars, depending on size and material. You’ll get the number in writing before we start.

Signs Your Cap Has Failed

Rust bleeding down the chimney chase, a cap that’s visibly crooked, or water stains on the smoke chamber ceiling all point to a cap at the end of its life. Sagging is the one to act on quickly, since a loose cap can drop onto the crown and crack it. We check the cap as part of every repair visit and tell you plainly whether it has years left or needs swapping now.

Matching the Cap to the Flue

A cap that’s too small leaves a gap for water to enter, and one that’s oversized sits proud and catches wind. We size replacements to the flue’s actual inside dimension and match the mounting style to what’s already on your crown. Stainless holds up best against chimney gases and weather, and we source ours through Olympia Chimney Supply.

Chimney Liner Installation

Chimney Liner Installation puts a new flue inside your old one, restoring a continuous, sealed path for smoke and gases from the firebox to the top. You need it when clay tiles are cracked, spalled, or missing joints, when the original flue was built for a different fuel than you’re burning now, or when a camera inspection shows gaps that let heat reach the wood framing. This is where the safety stakes are highest: a compromised liner lets carbon monoxide and heat escape into the structure. We install DuraFlex stainless flexible liner systems, sized and insulated for your appliance, along with HeatShield ceramic resurfacing when the existing tile can be restored rather than replaced. Liner work is priced per job after inspection, and the written estimate sets the final number.

When Relining Is the Right Call

Cracked or missing tile joints, a flue that’s too large for the insert someone installed, or a wood stove vented into a flue built for a fireplace are the common reasons we recommend relining. A camera inspection tells us which of those you actually have. If the tile is sound, we’ll tell you so, because relining a healthy flue isn’t work you need.

Flexible Stainless Versus Resurfacing

DuraFlex flexible liner is the choice when the existing flue is badly deteriorated or needs to be downsized for a modern appliance. HeatShield resurfacing repairs a cracked tile liner from the inside by applying a ceramic compound that cures into a smooth, sealed flue. We carry both because the right answer depends on the condition, not on what we’d rather sell.

Chimney Flashing Repair

Chimney Flashing Repair seals the joint where your chimney meets the roof, and it’s the most common source of the water stains homeowners blame on the flue. Flashing is the layered metal that steps up the chimney sides and laps into the shingles. When it pulls loose, rusts, or was never installed correctly, rain runs straight down the masonry and into the attic or ceiling. We replace step flashing, counter-flashing, and the sealant joints that hold them, working with the roofing material that’s actually on your house. Typical flashing repair in Wichita Falls runs from a few hundred dollars up to around a thousand when the whole assembly needs rebuilding. The free estimate covers the roof-side inspection so you know what’s included.

Leaks That Start at the Roof Line

Water that appears on a ceiling near the chimney usually enters at the flashing, not through the flue itself. Rusted metal, gaps under the counter-flashing, or caulk that’s dried and pulled away all let water in behind the masonry. We check the flashing on every roof-access repair, because fixing a crown while the flashing still leaks just moves the problem.

Metal, Masonry, and Siding Junctions

Chimneys meet roofs in different ways depending on whether the chase is brick, sided, or a metal prefab unit, and each junction needs its own flashing approach. Brick chases need counter-flashing set into a mortar joint. Sided chases need a head flashing with proper laps. We match the repair to what’s there instead of forcing one method onto every roof.

Chimney Crown Repair

Chimney Crown Repair addresses the concrete slab on top of the chimney that sheds water away from the flue and masonry below it. When the crown cracks, water gets into the brick and mortar and starts the slow damage that turns into a much bigger repair. Hairline cracks are normal with age; wide cracks, a crown that’s pulling away from the flue, or one that’s crumbling at the edges are not. We rebuild crowns with a proper slope so water runs off, and we seal the bond between the crown and the flue so it doesn’t separate again. Crown repair is quoted per job after we see the size and condition of the top, and the written estimate is what you pay.

Cracks, Spalling, and Slope

A crown should slope away from the flue on every side, and plenty of them were poured flat or have settled over time. Flat crowns hold water, and standing water finds every crack. We reshape the surface so it drains, which is the difference between a repair that lasts and one that’s back in a few years.

Resurfacing Versus Rebuilding

Light cracking can sometimes be sealed and coated, while a crown that’s broken into pieces or separated from the flue needs to come off and be rebuilt. We’ll show you the condition and explain which one applies, including when the honest answer is that it can wait a season or two. Nothing gets recommended without evidence you can look at yourself.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they can actually do, and the difference shows up the moment a sweep finds something wrong. Some clean and leave, some subcontract the repair, and some carry the materials and training to fix it on the spot. We do the diagnosis and the repair with the same technicians, using professional-grade systems from trade suppliers like Olympia Chimney and Copperfield rather than hardware-store substitutes. That matters in Wichita Falls, where a lot of chimneys are older masonry that needs someone who understands what they’re looking at. Repair pricing depends on the scope, and you’ll have it in writing before any work begins.

What Separates a Specialist from a Sweep

A specialist can tell you why a flue is failing, not just that it’s dirty, and can install a liner, rebuild a crown, or resurface tile in the same visit. That continuity means the person who found the problem is the person who fixes it. Ask any company you call whether they perform liner and masonry work in-house.

Questions to Ask Before You Book

Ask what the inspection includes, whether you’ll see photos of the flue interior, and whether the estimate is written and itemized. Ask what happens if the repair needs a part that isn’t on hand. A straight answer to those four questions tells you most of what you need to know about a chimney company.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick and mortar that hold your chimney together, and in this climate it’s the repair that most often gets postponed until it’s expensive. North Texas heat, wind-driven rain, and the occasional hard freeze work on mortar joints year after year. When joints crumble and brick faces spall, water gets deeper into the structure with every storm. We repoint mortar joints with the right mix for the brick, replace spalled brick, and address the exterior surfaces that take the weather. Masonry repair is quoted per job after inspection, since the extent of the deterioration decides the scope. The written estimate is the price.

Repointing and Spalled Brick

Repointing means grinding out failed mortar and packing new mortar into the joint, which stops water from tracking behind the brick. Spalled brick, where the face has flaked off, needs replacing rather than patching, because a damaged face keeps absorbing water. We match mortar color and composition to what’s already there so the repair doesn’t stand out.

Water Damage Above the Roof Line

Most masonry damage on a chimney happens above the roof, where wind-driven rain hits hardest and where nobody sees it from the ground. That’s why we inspect the exterior above the roof line on every repair visit. Catching soft mortar early is a far smaller job than rebuilding a chase.

Brands We Service

We work with DuraFlex flexible liner systems regularly, and we know where they wear and how they should be sized for a given appliance. DuraFlex is a professional-tier product, and installing it correctly means insulating it and terminating it properly at both ends, not just dropping it down the flue. We also work with HeatShield ceramic resurfacing, and we’re familiar with the application levels that determine whether a tile liner can be restored instead of replaced.

Our components come from professional chimney trade suppliers, including Olympia Chimney, Copperfield, Famco, and Gelco, the same distributors that supply certified chimney professionals across the country. We know how Famco and Gelco ventilation parts fit together from the firebox to the exterior termination, which matters when a repair has to match existing equipment. Whether you have DuraFlex, HeatShield, or any other make, we can help. Call (855) 705-9859 for a free estimate.

Signs You Need a Pro Right Now

• Smoke rolling back into the room. A fireplace that smokes into the house instead of up the flue usually has a blockage, a damaged flue, or a pressure problem. It’s a sign the draft path is compromised, and it’s worth having it looked at before you light another fire.
• Water stains on the ceiling or chimney chase. Stains near the chimney almost always trace back to failed flashing, a cracked crown, or a missing cap. Water inside the structure damages framing and insulation long before it shows on the paint.
• Crumbling mortar or loose brick on the exterior. Soft joints and spalled brick mean the masonry is taking on water. The repair is smaller now than it will be after another few storm seasons.
• A strong creosote smell or heavy soot at the damper. Creosote buildup in a flue with cracked tiles is a genuine chimney fire risk. A camera inspection tells you whether the flue itself is sound or just dirty.
• Liner damage or a missing cap found on inspection. Cracked tile joints and open flues let heat and carbon monoxide reach places they shouldn’t. These are the findings that turn into repair work the same day when the parts and time line up.

Our Process, Step by Step

1. 1
   Book the visit. Call and tell us what you’re seeing. We’ll schedule the visit and dispatch a technician between 7am and 7pm, Sunday through Friday. We’re closed Saturday.
2. 2
   Inspect and document. We sweep the flue, then run a camera down it and photograph what we find. You see the same images we do, which is the whole point: a recommendation you can’t verify isn’t one we’ll make.
3. 3
   Explain the findings in plain terms. We tell you what’s wrong, what’s cosmetic, and what can safely wait. If the chimney only needs a sweep, that’s what you’ll hear.
4. 4
   Write the estimate. Repair pricing is set per job by a written estimate, itemized so you know what each part of the work covers. The estimate is free and there’s no pressure to book the repair on the spot.
5. 5
   Complete the repair and show the result. When you approve the work, we perform it with professional-grade materials and document the finished job. We repair what we find, and we stand behind the result.

How Much Does Chimney Repair Cost in Wichita Falls?

Our Service Area Near Wichita Falls

We work throughout Wichita Falls and the surrounding towns, including Iowa Park, Burkburnett, Henrietta, Lakeside City, Holliday, Archer City, Electra, Pleasant Valley, and Dean. Scheduling across the area is straightforward: book the visit, and we’ll confirm the window with you when we set it. Call (855) 705-9859 to check availability for your address.

Frequently Asked Questions About Chimney Repair in Wichita Falls

Schedule Your Chimney Repair Service in Wichita Falls Today

If your flue has a crack, your cap has rusted through, or the masonry is going soft above the roof line, get it looked at before the season turns. Call (855) 705-9859 to book a chimney repair visit in Wichita Falls. We answer 24/7, with fast dispatch from 7am to 7pm. The estimate is free and carries no obligation. You’ll see the evidence before we recommend anything. One call covers your chimney and your dryer vent cleaning as well, and a Lionheart Chimney Sweep visit starts with a proper chimney sweep.

Written by the team at Lionheart Chimney Sweep.